DTC P2016 - Intake Manifold Runner Position Sensor/Switch Circuit Low (Bank 1)
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2018 Lincoln Navigator, 2018 Lincoln MKZ, 2018 Lincoln MKX, 2018 Lincoln MKT, and 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
P2016 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT LOW (BANK 1)
| Description: | This DTC sets when the intake manifold runner control bank 1 (IMRC1) sensor circuit voltage is less than a calibrated value. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The IMRC1 sensor value should change when the IMRC is commanded open or closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HU . | ||