DTC P0504 - Brake Switch Correlation
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2018 Lincoln Navigator, 2018 Lincoln MKZ, 2018 Lincoln MKX, 2018 Lincoln MKT, and 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
P0504 - BRAKE SWITCH CORRELATION
| Description: | This DTC sets when the calibrated threshold is exceeded during a comparison test between the brake pedal switch (BPS) and the brake pedal position (BPP) switch. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check the state of the BOO1 and BOO2 PIDs. The BOO1 PID is normally open and BOO2 PID is normally closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST FD . | ||