DTC P0335 - Crankshaft Position Sensor A Circuit
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2018 Lincoln Navigator, 2018 Lincoln MKZ, 2018 Lincoln MKX, 2018 Lincoln MKT, and 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
P0335 - CRANKSHAFT POSITION SENSOR A CIRCUIT
| Description: | This DTC sets when the crankshaft position (CKP) sensor profile ignition pickup (PIP) pulse is missing for greater than a calibrated number of camshaft revolutions when the camshaft speed exceeds the equivalent speed of engine idle or the starter motor is engaged. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An inactive CKP signal causes a no start condition. Monitor the RPM PID while cranking the engine. A value of 0 RPM indicates a CKP concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST JD . | ||