Pinpoint Test K: U3002:62
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to CRUISE CONTROL
for schematic and connector information.
Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition CCM U3002:62 Vehicle Identification Number: Signal Compare Failure This DTC sets when the stored VIN in the CCM does not match the VIN defined in the BCM. This may indicate that the original CCM is not installed in the vehicle or is not configured correctly. CARRY OUT the PMI (when the original module is not available) for the module in question as directed by the diagnostic scan tool. Possible Sources
- VIN mismatch
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods