Pinpoint Test Ag: U2200:00, U3000:49
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition DDM U2200:00 Control Module Configuration Memory Corrupt: No Sub Type Information Set by the DDM/ PDM when the module detects an unrecoverable data failure DDM U3000:49 Control Module: Internal Electronic Failure Set by the DDM/ PDMwhen the module fails the internal microprocessor test PDM U2200:00 Control Module Configuration Memory Corrupt: No Sub Type Information Set by the PDM when the module detects an unrecoverable data failure PDM U3000:49 Control Module: Internal Electronic Failure Set by the PDM when the module fails the internal microprocessor test Possible Sources
- DDM/ PDM.
- AG1 CHECK DDM (DRIVER DOOR MODULE) / PDM (PASSENGER DOOR MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, clear all DDM/ PDMDTC's
- Using a diagnostic scan tool, carry out the DDM/ PDM self-test.
Is diagnostic code U2200:00 or U3000:49 present?
Yes CHECK OASIS for any applicable service articles: TSB, GSB, SSM, or FSA. If a service article exists for this concern, DISCONTINUE this test and FOLLOW the service article instructions. If no service articles address this concern, INSTALL a DDM/ PDM. REFER to: Driver Door Module (DDM) . REFER to: Passenger Door Module (PDM) . No The system is operating correctly at this time.