LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 596 (Handles, Locks, Latches And Entry Systems) >> Diagnosis And Testing >> Locks, Latches and Entry Systems >> Pinpoint Tests >> Pinpoint Test Ac: U2100:00

Pinpoint Test Ac: U2100:00

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    The DDM/ PDM is able to communicate with others modules after a PMI is complete.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    DDM U2100:00 Initial Configuration Not Complete: No Sub Type Information Sets when the DDM configuration does not complete.
    PDM U2100:00 Initial Configuration Not Complete: No Sub Type Information Sets when the PDM configuration does not complete.

    Possible Sources 

    • Network communication concern
    • DDM
    • PDM

  2. AC1 CHECK DDM (DRIVER DOOR MODULE) / PDM (PASSENGER DOOR MODULE) DIAGNOSTIC TROUBLE CODES (DTC'S)

    • Using a diagnostic scan tool, carry out the DDM/ PDMPMI.

    Are there any other Diagnostic Trouble Codes (DTC's) Present? 

    Yes  REPAIR all non-network Diagnostic Trouble Codes (DTCs) from the DDM/ PDM.
    No  INSTALL a new DDM/ PDM. REFER to: Driver Door Module (DDM) . REFER to: Passenger Door Module (PDM) .
scientia non olet · About LEMON Manuals