LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 594 (Front Seats - Diagnosis And Testing, General Procedures, Removal And Installation) >> Removal And Installation >> Front Seat H Point Lift Sensor - Vehicles With: Max Recline Seats >> Removal

Front Seat H Point Lift Sensor - Vehicles With: Max Recline Seats: Removal

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the passenger seat. Refer to: Front Seat .
  2. Remove the front seat H point lift sensor nuts.

    Torque

    : 55 lb.in (6.2 Nm)

    GFD561808Courtesy of FORD MOTOR COMPANY
  3. Disconnect the front seat H point lift sensor electrical connector.
    GFD561809Courtesy of FORD MOTOR COMPANY
  4. Detach and remove the front seat H point lift sensor. Use the General Equipment: Interior Trim Remover
GFD561810Courtesy of FORD MOTOR COMPANY