Pinpoint Test G: C1034:78: Notes
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
REFER to: Parking Brake - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| ABS C1034:78 | Park Brake: Alignment Or Adjustment Incorrect | This DTC sets in continuous memory if the park brake component software sends the indication that the actuator position is not valid. |
Possible Sources
- The EPB Apply and Release routine was not carried out.
- Broken wiring to actuators
- Actuators are in different states before or after repairs