Pinpoint Test I: SASM DTC C1B00:54: Notes
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
The SASM is self-monitoring and capable of setting Diagnostic Trouble Codes (DTCs) to alert of potential internal errors. When the Steering Wheel Angle Trim routine is carried out, the SASM stores this information and refers back to the information during module wake up (ignition ON).
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| SASM C1B00:54 | Steering Angle Sensor: Missing Calibration | This DTC sets if steering angle sensor trim routine has not been successfully carried out. |
Possible Sources
- Steering angle sensors have not been trimmed
Visual Inspection and Pre-checks
- Using a diagnostic scan tool, carry out the Steering Wheel Angle Trim routine.