Pinpoint Test H: C1020:00: Notes
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
REFER to: Anti-Lock Brake System (ABS) and Stability Control - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| ABS C1020:00 | Brake System Fill Not Complete: No Sub Type Information | This DTC is pre-set in a new ABS module and can only be cleared when the brake system has been successfully bled. |
Possible Sources
- Brake system has not been bled