Pinpoint Test Ab: SASM DTC U3000:96: Notes
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
The SASM is self-monitoring and capable of setting Diagnostic Trouble Codes (DTCs) to alert of potential internal errors. The SASM uses a FET for circuit protection, when the FET creates an open circuit, the SASM sets a DTC.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| SASM U3000:96 | Control Module: Component Internal Failure | This DTC sets due to an internal failure of the SASM high power circuit FET. |
Possible Sources
- SASM internal failure