Pinpoint Test I: Rattling Noise
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- I1 CHECK CALIPER GUIDE PINS OR PINS BOLTS
- Inspect the caliper guide pins and guide pin bolts.
Is any concern present?
Yes INSPECT the caliper guide pins and guide pin bolts. INSTALL new components as necessary. No GO to I2 - I2 CHECK FOR ANTI-RATTLE CLIPS OR SPRINGS
- Inspect anti-rattle clips or springs for missing or damage.
Is any concern present?
Yes INSPECT the brake pads for missing clips or broken springs. INSTALL new components as necessary. No GO to I3 - I3 CHECK BRAKE DISC SHIELD
- Inspect brake disc shield and bolts.
Is any concern present?
Yes TIGHTEN the brake disc shield bolts to specification. REFER to: Brake Disc Shield . REFER to: Brake Disc Shield . No The repair is complete. The system is operating correctly at this time.