Pinpoint Test Z: 4X4 Temporarily Disabled Displayed In Message Center
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
If the system is in 4A and TCCM detects excessive stress or high energy going through the clutch (clutch is slipping excessively while the system is commanding max clutch torque), clutch output will be reduced and a massage will appear in the message centre display. When the system has had the opportunity to cool off, 4x4 operation will be automatically restored.
Possible Sources
- Powertrain Torque Protection mode active
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods