DTC P24A0 - Closed Loop DPF Regeneration Control At Limit - Temperature Too Low
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P24A0 - CLOSED LOOP DPF REGENERATION CONTROL AT LIMIT WITH TEMPERATURE TOO LOW
| Description: | The PCM monitors the exhaust gas temperature bank 1, sensor 2 (EGT12) to make sure that diesel oxidation catalyst exit temperature is high enough to complete a regeneration. This DTC sets when the difference between the expected and actual diesel oxidation catalyst exit temperature exceeds 20°C (36°F). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RC . | ||