LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 532 (Engine Controls - Powertrain Diagnostics - DTC P218F Through DTC U1013 - (Diesel)) >> DTC P249E - Closed Loop Reductant Injection Control At Limit - Flow Too High

DTC P249E - Closed Loop Reductant Injection Control At Limit - Flow Too High

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P249E - CLOSED LOOP REDUCTANT INJECTION CONTROL AT LIMIT WITH FLOW TOO HIGH

Description:  The PCM adapts a closed loop correction factor to account for long term drift of the selective catalytic reduction (SCR) system. This correction factor is monitored continuously. This DTC sets when the correction factor reaches a positive threshold for 5 minutes.
Possible Causes: 
  • Damaged SCR system components
  • Biased nitrogen oxides bank 1, sensor 2 (NOx12) sensor
Diagnostic Aids:  This DTC is informational on DTCs first. If DTC P229F is p
ly and may be accompanied by other DTCs. Diagnose other resent along with DTC P249E, diagnose DTC P229F first.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST RK .