DTC P246E - Exhaust Gas Temperature Sensor Circuit (Bank 1 Sensor 4)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P246E - EXHAUST GAS TEMPERATURE SENSOR CIRCUIT (BANK 1 SENSOR 4)
| Description: | The PCM monitors the operation of the exhaust gas temperature bank 1, sensor 4 (EGT14) to determine if the EGT14 sensor responds to the increase in temperature of the exhaust gas, during vehicle operation. The PCM then compares the measured temperature to a modeled value. This DTC sets when, after 5 minutes of driving, following a 6 hour soak, the EGT14 sensor temperature does not correlate to the modeled temperature of 110°C (230° F). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the EGT14 PID between ignition ON, engine OFF and ignition ON, engine running for an indication of a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RC . | ||