DTC P034B - Crankshaft Position Sensor - Crankshaft Direction Incorrect
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P034B - CRANKSHAFT POSITION SENSOR - CRANKSHAFT DIRECTION INCORRECT
| Description: | This DTC sets when the saved engine stop position and the detected engine start position differ by greater than 9 degrees, during engine restart in auto start stop mode. The engine position information is discarded and a camshaft position (CMP) sensor, crankshaft position (CKP) sensor synchronization process is carried out resulting in a longer restart condition in auto start stop mode. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC may be accompanied by other CKP sensor DTCs. Diagnose all other CKP sensor DTCs first. If no other CKP sensor DTCs are present, continue to follow diagnosis for this DTC. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST D . | ||