DTC P0340 - Camshaft Position Sensor A Circuit (Bank Or Single Sensor)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0340 - CAMSHAFT POSITION SENSOR A CIRCUIT (BANK OR SINGLE SENSOR)
| Description: | This DTC sets when the PCM can no longer detect the signal from the camshaft position (CMP11) sensor. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST V . | ||