DTC P0016 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0016 - CRANKSHAFT POSITION AND CAMSHAFT POSITION CORRELATION WITH BANK 1 SENSOR A
| Description: | This DTC sets if the location of the gap on the crankshaft position (CKP) sensor wheel is greater than 6 degrees from the expected location on the camshaft position 11 (CMP11) sensor wheel for two detection attempts. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Verify the CKP sensor has been installed and aligned correctly. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST D . | ||