LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 513 (Electronic Power Assist Steering (EPAS) Guided Routine) >> Pinpoint Tests >> Pinpoint Tests BO: PSCM DTC U2016 Control Module Main Software >> Pinpoint Test Purpose

Pinpoint Test Purpose

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2021 Lincoln Corsair, 2021 Lincoln Aviator, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, and 2021 Ford Transit-250. However, it is still accessible from the selected car via links, so may be relevant.

To verify PSCM DTC U2016 is present and provide diagnostics if DTC U2016 is currently active in the PSCM.

  1. BO1: VERIFY THE PSCM DTC 
    • Ignition ON, engine OFF.
    • Clear the PSCM DTCs.
    • Ignition OFF.
    • Wait at least 90 seconds for the modules to completely shut off.
    • Start the vehicle.
      • Make sure the engine ready indicator is illuminated.

      Carry out the PSCM self-test.

    • Is DTC U2016:xx present and active in the PSCM? 
    Yes No
    INSTALL a new EPAS steering column.
    REFER to the Steering Column article.
    ORDER a replacement EPAS column and INCLUDE the RVC on the form.
    If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form.
    If the PSCM does not list DTC U2016, DISCONTINUE this test and REFER to the DTC Chart for direction.