P0335 - Crankshaft Position Sensor A Circuit
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2022 Ford F-550 Super Duty, 2022 Ford F-450 Super Duty, 2022 Ford F-350 Super Duty, 2022 Ford F-250 Super Duty, and 2021 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0335 - CRANKSHAFT POSITION SENSOR A CIRCUIT
| Description: This DTC sets when the crankshaft position (CKP) sensor signal is missing for greater than a calibrated number of camshaft revolutions. | |||
Possible Causes:
|
|||
| Diagnostic Aids:
The presence of this DTC may indicate that the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle until the system warning message has cleared from the instrument cluster message center. Monitor the RPM PID while cranking the engine. A value of 0 RPM indicates a CKP concern. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST D . | ||