P0016 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2022 Ford F-550 Super Duty, 2022 Ford F-450 Super Duty, 2022 Ford F-350 Super Duty, 2022 Ford F-250 Super Duty, and 2021 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0016 - CRANKSHAFT POSITION, CAMSHAFT POSITION CORRELATION (BANK 1 SENSOR A)
| Description: This DTC sets if the location of the gap on the crankshaft position (CKP) sensor wheel is greater than 6 degrees from the expected location on the camshaft position 11 (CMP11) | |||
| sensor wheel for two detection attempts. Possible Causes:
|
|||
| Diagnostic Aids: Verify the CKP sensor has been installed and aligned correctly. Verify the CMP11 sensor has been installed and aligned correctly. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST D . | ||