Exhaust Gas RECIRCULATION (EGR) Cooler System

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2022 Ford F-550 Super Duty, 2022 Ford F-450 Super Duty, 2022 Ford F-350 Super Duty, 2022 Ford F-250 Super Duty, and 2021 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The exhaust gases are directed through the EGR cooler to lower the exhaust gas temperature before entering the intake manifold. Engine coolant reduces the exhaust gas temperature when the gases are directed through the EGR cooler by closing the EGR bypass valve.

The PCM controls the EGR cooler bypass valve by commanding the EGR cooler bypass solenoid duty cycle. When the EGR cooler bypass valve is commanded to 0%, duty cycle, the exhaust gases pass through the EGR cooler to the intake manifold. When the EGR cooler bypass valve is commanded to 100%, duty cycle, the exhaust gases pass directly to the intake manifold without passing through the EGR cooler.

For additional information on the EGR cooler system components, refer to ENGINE CONTROL COMPONENTS .