Relative Humidity (RHS) Sensor
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2022 Ford F-550 Super Duty, 2022 Ford F-450 Super Duty, 2022 Ford F-350 Super Duty, 2022 Ford F-250 Super Duty, and 2021 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
The relative humidity sensor measures the humidity of the intake air by using a membrane allowing air to enter the cell while protecting it from liquid contaminants and dust. Relative humidity is the ratio of water vapor present in the air compared to the maximum amount the air can hold at that temperature and pressure.
The intake air humidity measurement is a key parameter for engine management. The PCM uses the input from the relative humidity sensor to adjust EGR flow rates in high humidity environments.
Typical MAF/IAT/TCIP/RHS Sensor