LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 501 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> P26C4 - Internal Control Module Clutch Pedal Performance

P26C4 - Internal Control Module Clutch Pedal Performance

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2021 Lincoln Navigator, 2021 Lincoln Nautilus, 2021 Lincoln Corsair, 2021 Lincoln Aviator, and 2021 Ford Transit-350 HD. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P26C4 - INTERNAL CONTROL MODULE CLUTCH PEDAL PERFORMANCE

Description:  This DTC sets when the PCM detects a concern with the clutch pedal position (CPP) sensor signal.
Possible Causes: 
  • Damaged harness connector
  • Water in the harness connector
  • Corrosion
Diagnostic Aids:  This DTC may be accompanied by other DTCs. Diagnose all other clutch pedal position (CPP) sensor DTCs first. If no other CPP sensor related DTCs are present, continue to follow diagnosis for this DTC. This DTC is a functional check of the CPP sensor input for the auto start stop system. Refer to Powertrain Control Software, Auto Start Stop for additional information.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test TA.