LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 501 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> P0315 - Crankshaft Position System Variation Not Learned

P0315 - Crankshaft Position System Variation Not Learned

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2021 Lincoln Navigator, 2021 Lincoln Nautilus, 2021 Lincoln Corsair, 2021 Lincoln Aviator, and 2021 Ford Transit-350 HD. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0315 - CRANKSHAFT POSITION SYSTEM VARIATION NOT LEARNED

Description:  The PCM has not learned the crankshaft pulse wheel tooth spacing. This DTC disables the misfire monitor.
Possible Causes: 
  • Aftermarket performance products
  • Misfire monitor neutral profile correction has not been relearned since the last mechanical repair
  • PCM reprogramming
  • PCM replacement
  • Internal PCM non-volatile random access memory (NVRAM) error
Diagnostic Aids:  The misfire monitor neutral profile correction must be relearned after any engine rotational component installation or repair.
Carry out the Misfire Monitor Neutral Profile Correction procedure using the scan tool. Refer to Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Neutral Profile Correction.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test JD.