LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 499 (Engine Controls - Diagnostic Methods (Except Diesel & Hybrid)) >> On Board System Readiness (OSR) Test >> Description

On Board System Readiness (OSR) Test: Description

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2021 Lincoln Navigator, 2021 Lincoln Nautilus, 2021 Lincoln Corsair, 2021 Lincoln Aviator, and 2021 Ford Transit-350 HD. However, it is still accessible from the selected car via links, so may be relevant.

All on board diagnostic (OBD) scan tools display the OSR test. The OSR displays the supported monitors on the vehicle and the status of all monitors (complete or not complete) at that time. Fuel, misfire, and comprehensive component monitors (CCMs) run continuously and always display a YES status. Clearing the continuous diagnostic trouble codes (DTCs) and resetting the emission monitors information in the PCM, or resetting the keep alive memory (KAM) causes the non-continuous monitors to change to a NO status.

A detailed description of completing the OBD monitors is found. Refer to On Board Diagnostic (OBD) Drive Cycle.