LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 498 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> On Board Diagnostics (OBD) Monitors >> OBD I, OBD II And Engine Manufacturer Diagnostics (EMD) Overview >> Notes

OBD I, OBD II And Engine Manufacturer Diagnostics (EMD) Overview: Notes

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2021 Lincoln Navigator, 2021 Lincoln Nautilus, 2021 Lincoln Corsair, 2021 Lincoln Aviator, and 2021 Ford Transit-350 HD. However, it is still accessible from the selected car via links, so may be relevant.

The California Air Resources Board (CARB) began regulating OBD systems for vehicles sold in California beginning with the 1988 model year. The initial requirements, known as OBD I, required identifying the likely area of concern with regard to the fuel metering system, exhaust gas recirculation (EGR) system, emission related components and the PCM. A malfunction indicator lamp (MIL) was required to illuminate and alert the driver of the concern and the need to repair the emission control system. A DTC was required to assist in identifying the system or component associated with the concern.

Starting with the 1994 model year, both CARB and the Environmental Protection Agency (EPA) mandated enhanced OBD systems, commonly known as OBD II. The objectives of the OBD II system are to improve air quality by reducing high in use emissions caused by emission related concerns, reducing the time between the occurrence of a concern and its detection and repair, and assisting in the diagnosis and repair of emission related problems.