Drive Pinion: Notes
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM Color Coding .
Special Tool(s) / General Equipment
| 205-098 (T75T-1176-A) Drawbar, Rear Axle | |
|---|---|
| 205-159 (T80T-4020-F42) Adapter for 205-S156 Pinion Depth Gauge T98T-1000-LM-1 TKIT-1998-LM (NavigatoR) | |
| 205-160 (T80T-4020-F43) Adapter for 205-S156 Pinion Depth Gauge | |
| 205-229 (T85T-4209-AH) Protector, Drive Pinion Thread TKIT-1985-FH-1 | |
| 205-231 (T85T-4616-AH) Installer, Drive Pinion Bearing TKIT-1985-FH-1 | |
| 205-232 (T85T-4621-AH) Installer, Drive Pinion Bearing TKIT-1985-FH-1 | |
| 205-281 (T88T-4020-B) Depth Gauge/Aligner, Drive Pinion (Handle) TKIT-1988-FLM TKIT-1988-F | |
| 205-423Depth Gauge, Drive Pinion (10 1/2) TKIT-1999-F/FLM/LT | |
| 205-937 Adapter, Pinion Aligning TKIT-2009C-F TKIT-2009C-ROW | |
| 205-D038 (D81T-4020-F51) Gauge Tube | |
| 205-D064 (D84L-1123-A) Puller, Bearing | |
| 308-391 Installer, Input Shaft Bearing Cup TKIT-1999-F/FLM/LT | |
| Rubber Mallet | |
| Hydraulic Press | |
| Punch | |
| Copper Hammer |