LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Rear Drive Axle/Differential - Vehicles With: Ford 10.5 Inch Ring Gear) >> Removal And Installation >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
  2. Remove the differential housing cover bolts and if equipped, the differential housing cover clamp.
    GFD200735Courtesy of FORD MOTOR COMPANY
  3. Remove the differential housing cover.
    GFD200736Courtesy of FORD MOTOR COMPANY
  4. NOTE: Remove all of the silicone gasket and make sure the surfaces are free of oil before applying the new silicone gasket.

    Clean the gasket mating surface of the axle and the differential housing cover. Refer to: RTV Sealing Surface Cleaning and Preparation .

GFD200737Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals