Intake Manifold Runner Control (IMRC) And Intake Manifold Tuning Valve (IMTV)

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2020 Lincoln Navigator, 2020 Lincoln Nautilus, 2020 Lincoln MKZ, 2020 Lincoln Corsair, and 2020 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: SUBSTANTIAL OPENING AND CLOSING TORQUE IS APPLIED BY THIS SYSTEM. TO PREVENT INJURY, BE CAREFUL TO KEEP FINGERS AWAY FROM LEVER MECHANISMS WHEN ACTUATED. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

There are 2 basic types of intake air subsystems:

IMRC
IMTV

There are several different styles of hardware used to control airflow within the engine air intake system. In general, the devices are defined based on whether they control charge motion or manifold tuning.

The IMRC modifies the air charge motion in the intake manifold. The IMRC is located at the rear of the intake manifold. The IMRC system must have a monitor feedback system in order to meet OBD II regulations.

The IMTV modifies the airflow volume of the manifold by connecting multiple plenums or inlets within the intake manifold. The IMTV control valve is located in the center of the intake manifold. The IMTV system does not have to be monitored for OBD II regulations.

These subsystems provide increased intake airflow to improve torque, emissions and performance. The overall volume of air metered to the engine is controlled by the throttle body.