Powertrain Control Module - Vehicle Speed Output (PCM-VSO)

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2019 Lincoln Navigator, 2019 Lincoln Nautilus, 2019 Lincoln MKZ, 2019 Lincoln MKT, and 2019 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

The PCM-VSO speed signal subsystem generates vehicle speed information for distribution to modules and subsystems that require vehicle speed data. This subsystem senses the transmission output shaft speed with a sensor. The data is processed by the PCM and distributed as a message on the vehicle communication network.

The key features of the PCM-VSO system are to:

infer vehicle movement from a speed sensor.
convert transmission output shaft rotational information to vehicle speed information.
compensate for tire size and axle ratio with a programmed calibration variable.
distribute vehicle speed information as a multiplexed message.

The signal from a non-contact shaft sensor, such as an output shaft speed (OSS) sensor or vehicle speed sensor (VSS), mounted on the transmission is sensed directly by the PCM. The PCM converts the OSS or VSS information to 8, 000 pulses per mile, based on a tire and axle ratio conversion factor. This conversion factor is programmed into the PCM at the time the vehicle is assembled and can be reprogrammed in the field for changes in the tire size and axle ratio. The PCM transmits the computed vehicle speed and distance traveled information to all vehicle speed signal users on the vehicle.