On Board System Readiness (OSR) Test: Description
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2019 Lincoln Navigator, 2019 Lincoln Nautilus, 2019 Lincoln MKZ, 2019 Lincoln MKT, and 2019 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
All on board diagnostic (OBD) scan tools display the OSR test. The OSR displays the supported monitors on the vehicle and the status of all monitors (complete or not complete) at that time. Fuel, misfire, and comprehensive component monitors (CCMs) run continuously and always display a YES status. Clearing the continuous diagnostic trouble codes (DTCs) and resetting the emission monitors information in the PCM, or resetting the keep alive memory (KAM) causes the non-continuous monitors to change to a NO status.
A detailed description of completing the OBD monitors is found in this article. Refer to ON BOARD DIAGNOSTIC (OBD) DRIVE CYCLE .