Neutral Profile Correction

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2019 Lincoln Navigator, 2019 Lincoln Nautilus, 2019 Lincoln MKZ, 2019 Lincoln MKT, and 2019 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

In order for the misfire detection system to function correctly, any mechanical inaccuracies in the crankshaft position (CKP) sensor must be learned by the PCM. This information is stored in non-volatile memory (NVM) in the PCM. It is not cleared when the keep alive memory (KAM) is reset.

Neutral profile learning is accomplished using the scan tool any time a PCM is replaced. It should also be relearned any time the CKP sensor or the crankshaft pulse wheel is replaced or major engine repairs have been completed.

To determine if the neutral profile learning has been completed, check the MP_LRN parameter identification (PID) using the scan tool. The PID should read YES if the neutral profile learning has been completed. If the PID reads NO, complete the neutral profile learning prior to diagnosing any misfire DTCs.