LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Engine Controls - Description & Operation (Diesel)) >> On Board Diagnostics (OBD) Monitors >> OBD II >> Notes

OBD II: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The California OBD II applies to all California and Clean Air Act States for gasoline engine vehicles up to 14, 000 lbs. gross vehicle weight rating (GVWR) starting in the 1996 model year and all diesel engine vehicles up to 14, 000 lbs. GVWR starting in the 1997 model year.

The Clean Air Act States have adopted and placed into effect the California Air Resources Board (CARB) regulations for a vehicle class or classes in accordance with the Clean Air Act. Currently the Clean Air Act States are California, Connecticut, Delaware, Maine, Maryland, Massachusetts, New Jersey, New Mexico, New York, Oregon, Pennsylvania, Rhode Island, Vermont and Washington. These States receive California certified vehicles for passenger cars and light trucks, and medium-duty vehicles, up to 14, 000 lbs. GVWR.

The Federal OBD applies to all gasoline engine vehicles up to 8, 500 lbs. GVWR starting in the 1996 model year and all diesel engine vehicles up to 8, 500 lbs. GVWR starting in the 1997 model year. The US Federal only OBD certified vehicles may use the US Federal allowance to certify to California OBD II.

Starting in the 2004 model year, Federal vehicles over 8, 500 lbs. are required to phase in OBD II, and gasoline fueled medium duty passenger vehicles are required to have OBD II. By the 2006 model year, all Federal vehicles from 8, 500 to 14, 000 lbs. GVWR will have been phased into OBD II.