LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 472 (Abs Guided Routine) >> Pinpoint Tests >> Pinpoint Tests BS: Brake Wear Lining Sensor Fault >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The BCM uses 2 normally-open switches, connected in series, to monitor the wear of the brake pads. As the brake pads wear, the switches close. Once fully closed, the BCM sends a message to the IPC to display a warning in the message center. 

DTC DESCRIPTION

DTC Description Fault Trigger Conditions
C004A:13 Brake Lining Wear Indicator: Circuit Open This DTC sets when the BCM detects an open circuit condition in the brake lining wear indicator circuit.