LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 472 (Abs Guided Routine) >> Pinpoint Tests >> Pinpoint Tests BB: SASM Communication Concern With IPC >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the IPC sends messages to the SASM through the GWM and over the HS-CAN 3. If the SASM does not receive these messages within a certain time frame (usually less than 1 second), the SASM sets DTCs. 

DTC DESCRIPTION

DTC Description Fault Trigger Conditions
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information Sets in continuous memory and on-demand when the SASM detects any of the IPC messages are missing. This can be due to a IPC failure, a circuit failure on the HS-CAN or an excessive load on the network.
scientia non olet · About LEMON Manuals