Normal Operation and Fault Conditions
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
The ABS module uses information from the wheel speed sensors, RCM and SASM to determine when stability control intervention is necessary to help stabilize the vehicle. The ABS module uses the HCU to modulate the brake fluid pressure to the brake calipers and continues to monitor the sensor and module input until the instability event has been corrected. Once the sensors and modules indicate the instability event has been corrected, the ABS module deactivates the HCU. Under inflated tires, wheels and tires that do not match VC label specifications, suspension and steering damage, and one or more sensor failures contribute to the ABS module setting this DTC.
PPT AD ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| C006B:00 | Stability System Active Too Long: No Sub Type Information | Sets when the ABS module detects the ABS, ESC or RSC function has been active for longer than the various sensors indicate is necessary. |