Rear Brake Pads - F-450/F-550: Installation
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: Make sure that the brake hose is not twisted when installing the brake caliper or damage to the brake flexible hose may occur.NOTE: Tighten the bottom caliper bolt before tightening the top caliper bolt and make sure the caliper pin boots are correctly seated or damage to guide pins may occur.NOTE: If installing new brake pads, install all new hardware as supplied with the brake pad kit.
To install, reverse the removal procedure.
-
NOTE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.
Depress the brake pedal, check the brake fluid level in the brake fluid reservoir and top up as necessary with brake fluid. Refer to: Specifications .