Pinpoint Test A : The Roof Opening Panel Has Excessive Wind Noise: Notes
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel system or when the roof opening panel motor, glass, assembly, or air deflector has been removed or replaced for any reason. REFER to: Power Roof Opening Panel Initialization .
Normal Operation and Fault Conditions
During normal operation the sunroof seals against the roof opening tightly and evenly preventing wind noise. Any variation in alignment or failure to seal will cause wind noise.
Possible Causes
- Incorrect roof opening panel alignment
- Roof opening panel glass seals
Visual Inspection and Diagnostic Pre-checks
- Roof opening panel seals