Rear Seat RH - SuperCab: Removal
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the seat bolts.
- Raise the RH seat cushion.
- Remove the bolts.
Torque: 19 lb.ft (26 Nm)
- Pull the backrest release strap and fold the seat backrest forward.
- Remove the anchor bolt.
Torque: 30 lb.ft (40 Nm)
- Remove the seat nuts and the seat.
Torque: 59 lb.ft (80 Nm)