Rear Seat Cushion Cover - SuperCrew: Removal
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH shown, RH similar.
- Remove the rear seat. Refer to: Rear Seat RH - SuperCrew . Refer to: Rear Seat LH - SuperCrew .
- Release the seat cushion cover lower J-clip.
- Position the rear seat latch pull strap through the cushion cover trim pocket.
-
NOTE: Use care when separating the seat cushion cover from the hook-and-loop strip or the hook-and-loop strip can be torn from the foam pad.
On both sides, unzip and open the cushion cover. Release the hook-and-loop strips.
-
NOTE: Use care when separating the seat cushion cover from the hook-and-arrow strip or the hook-and-arrow strip can be torn from the foam pad.
Release the hook-and arrows from the foam pad and remove the cushion cover.
NOTE: This step only necessary when installing a new component. - Remove the cushion foam.