Rear Parking Aid Camera
The rear parking aid camera is located on the tailgate, below the tailgate release handle. On vehicles equipped with the 360 degree view camera system or with the rear only parking aid camera system with PTBA, the rear camera communicates with the IPMB through a LIN circuit. On vehicles equipped with the rear only parking aid camera system without PTBA, the rear camera communicates with the BCM through a LIN circuit. The camera must be configured using a diagnostic scan tool after replacement in order for all features to operate properly. (Electrical>Service Functions> LIN New Module Initialization or Electrical>Service Functions>LIN New Module Initialization- IPMB)
On vehicles equipped with the 360 degree view camera system, the 360 degree view camera alignment must be performed after the tailgate, tailgate handle, or any parking aid camera is removed from the vehicle.
On vehicles equipped with the 360 degree view camera system and PTBA, the 360 degree view camera alignment and the PTBA camera alignment must be performed after the tailgate, tailgate handle, or any parking aid camera is removed from the vehicle.
On vehicles equipped with the rear only parking aid camera system and PTBA, the PTBA camera alignment must be performed after the tailgate, tailgate handle, or rear parking aid camera is removed from the vehicle.
Refer to: 360 Degree View Camera Alignment . Refer to: Pro Trailer Backup Assist Camera Alignment .