360 Degree Image Composition
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
To generate the 360 degree view, the IPMB combines and aligns the images from all 4 cameras to produce a single overhead view that is displayed on the FDIM along with a front or rear camera view.
NOTE:
When a camera or any body component that a camera is attached to is removed or adjusted, the 360 degree view camera alignment must be performed to create a 360 degree image.
Refer to: 360 Degree View Camera Alignment .
| Item | Description |
|---|---|
| 1 | Front camera image |
| 2 | LH side camera image |
| 3 | RH side camera image |
| 4 | Rear camera image |