Pinpoint Test C : DTC B129C:96, DTC B129D:96: Notes
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B129C:96 | Left Front Side Sensor: Component Internal Failure | A continuous and on-demand DTC that sets in the PAM when the left front active park assist sensor has internally failed or has an incorrect attenuation time. |
| B129D:96 | Right Front Side Sensor: Component Internal Failure | A continuous and on-demand DTC that sets in the PAM when the right front active park assist sensor has internally failed or has an incorrect attenuation time. |
Possible Causes
- Active park assist sensor
- PAM (integral to the BCM)
NOTE:
Before disconnecting any of the active park assist sensors, verify the connectors are properly seated and latched.