LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Anti-Lock Brake System (Abs) And Stability Control) >> Diagnosis And Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Pinpoint Tests >> Pinpoint Test S : U3002:62 >> Pinpoint Test S : U3002:62

Pinpoint Test S : U3002:62

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

  1. S1 VERIFY THE PCM (POWERTRAIN CONTROL MODULE) VIN (VEHICLE IDENTIFICATION NUMBER)

    • Ignition ON.

    • Using a diagnostic scan tool, compare the VIN in the PCM with the VIN plate on the vehicle.

    Does the VIN in the PCM match the VIN plate? 

    Yes  GO to  S2
    No  RECONFIGURE the PCM. FOLLOW the instructions on the diagnostic scan tool. Refer to: Module Configuration - System Operation and Component Description .

  2. S2 VERIFY THE ABS (ANTI-LOCK BRAKE SYSTEM) MODULE PART NUMBER

    • Using a diagnostic scan tool, retrieve and record the ABS module part number.

    • Compare the part number retrieved to the part number in the parts catalog or equivalent.

    Is the correct ABS module installed in the vehicle? 

    Yes  CONFIGURE the ABS module. FOLLOW the instructions on the diagnostic scan tool. Refer to: Module Configuration - System Operation and Component Description .
    No  INSTALL a new ABS module. Refer to: Anti-Lock Brake System (ABS) Module .
scientia non olet · About LEMON Manuals