Pickup Bed Side Step: Removal

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

NOTE: LH side shown, RH side similar.

With the vehicle in NEUTRAL, position it on a hoist. Refer to Jacking and Lifting - Overview
NOTE: If equipped, SuperCrew 5.5 ft. styleside pickup box.

Remove the 2 bolts and 2 nuts from the step assembly.

Torque: 30 lb.ft (41 Nm)

Courtesy of FORD MOTOR COMPANY
Remove the step assembly.

Courtesy of FORD MOTOR COMPANY
Remove the 3 bolts and remove the bracket assembly.
Torque: 30 lb.ft (41 Nm)

Courtesy of FORD MOTOR COMPANY
NOTE: If equipped with 8.5 ft. or 6.5 ft. styleside pick up box.

Remove the 2 bolts and 2 nuts from the step assembly.

Torque: 30 lb.ft (41 Nm)

Courtesy of FORD MOTOR COMPANY
Remove the step assembly.

Courtesy of FORD MOTOR COMPANY
Remove the 4 bolts and remove the bracket assembly.
Torque: 30 lb.ft (41 Nm)

Courtesy of FORD MOTOR COMPANY