PTBA Image Display

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

On vehicles equipped with the 360 degree view camera system, when the ignition is ON, the PTBA control knob button is in the on position and reverse gear is selected, the rear parking aid camera views are shown on the FDIM. In the Rear PTBA 360 + Rear Normal view, the rear park aid camera view image in the PTBA 360 degree view is replaced with a trailer graphic. The Rear Normal view contains an icon representing a trailer attached to a truck on the right side of the display. The Rear PTBA 360 + Rear Normal view is shown first. Subsequent presses of the camera selection switch allow the driver to cycle through the rear parking aid camera views in the following order:

View order	View name	Description
1	Rear PTBA 360 + Rear Normal	Contains the normal rear parking aid camera view, shown next to a PTBA 360 degree camera view.
2	Rear Normal	Provides an image of what is directly behind the vehicle.

On vehicles equipped with the rear only parking aid camera system, when the ignition is ON, the PTBA control knob button is in the on position and reverse gear is selected, the rear PTBA camera view is shown on the FCDIM. The rear PTBA camera view contains an icon representing a trailer attached to a truck on the right side of the display.

For additional information on the centerstack infotainment display, Refer to: Parking Aid - System Operation and Component Description .