Pinpoint Test E : The One-Touch Up Feature Is Inoperative

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

E1 INITIALIZE THE SUSPECT POWER WINDOW

Carry out the initialization procedure on the suspect power window. REFER to: Power Door Window Initialization .

Is the one-touch up feature operating correctly?

Yes	The system is operating normally at this time. The window lost initialization.

If the one-touch up feature is inoperative for the LH front window, INSTALL a new master window control switch. REFER to: Front Door Window Control Switch - Vehicles With: Front Power Windows . TEST the system for normal operation. If the concern is still present, INSTALL a new DDM. REFER to: Driver Door Module (DDM) . If the one-touch up feature is inoperative for the RH front window, INSTALL a new window control switch. REFER to: Front Door Window Control Switch - Vehicles With: Front Power Windows . TEST the system for normal operation. If the concern is still present, INSTALL a new PDM. REFER to: Passenger Door Module (PDM) .