Pinpoint Test Y : DTC P0868
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
The TCM monitors clutch applications for all gears. It sets a DTC for low transmission fluid pressure if multiple clutches do not properly apply.
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition TCM P0868:00 Transmission Fluid Pressure Low: No Sub Type Information This DTC indicates a non-electrical fault causing 2 or more clutches to fail to apply. The TCM understands this as most likely caused by low line pressure. Possible Sources
- Transmission fluid contamination
- Low line pressure
- Y1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)
- Ignition ON.
- Using a diagnostic scan tool, clear the DTC from the TCM.
- Road test the vehicle.
- Using a diagnostic scan tool, retrieve all TCM continuous memory diagnostic trouble codes (CMDTCs).
Is DTC P0735 present in the TCM?
Yes Check the transmission fluid for contamination. REFER to: Preliminary Inspection . Carry out the line pressure test. REFER to: Special Testing Procedures . No The fault is not present at this time and may be intermittent.